ABC4090 - Anybus Communicator - Common Ethernet - Common Ethernet

Giá bán: Liên hệ

Mã sản phẩm: ABC4090

Thương hiệu: Anybus - HMS Industrial Networks

Tình trạng: Còn hàng

Order Code ABC4090
Included components            

Anybus Communicator - Common Ethernet

Tư vấnhotline0965746247

The Anybus Communicator Common Ethernet - Common Ethernet is an industrial protocol gateway that allows you to seamlessly transfer data between PLC control systems over EtherNet/IP, Modbus TCP, and PROFINET networks. The Anybus Communicator Common Ethernet –  Common Ethernet is pre-loaded for PROFINET IO-device - EtherNet/IP adapter networks but by updating the firmware the device supports combinations of Ethernet/IP, EtherCAT, Modbus TCP, and PROFINET networks.

Anybus Communicators are designed to ensure reliable, secure, and high-speed data transfer between different industrial Ethernet and Fieldbus networks. Very easy to install and deploy, the stand-alone gateways enable transparent data exchange between PLCs allowing you to both bridge and integrate legacy equipment into modern high-performance networks with only minimal changes to the software.

Anybus Communicators are built using the award-winning and proven Anybus NP40 industrial network processor providing network conformance, high performance, and reliability. When connecting between PLCs on different networks, extremely fast data cycling is enabled with data transfer of up to 1500 bytes in each direction, meeting most current control application needs as well as supporting future demands.

Quick installation is ensured thanks to the intuitive configuration, easy-to-understand documentation, and smart hardware and housing design.

Excellent performance

  • Instant data transfer - The time required for data transfer between two PLCs is made up of the cycle time of the first network plus the cycle time of the second network. The internal data transfer in the communicator is negligible because it corresponds to the natural fluctuations of the network cycle times (jitter).
  • Hardware-accelerated endian conversion (byte swap) - Communicators can change the data representation (endianness) using hardware-accelerated endian conversion to ensure that data is represented correctly in each PLC. You can even convert different parts of the data area in different ways to handle different types of data. This has no impact on performance, relieves the PLC of the data conversion task, and simplifies PLC programming.


Easy startup

  • Dedicated Ethernet configuration port - no special cables required.
  • Intuitive web-based drag-and-drop configuration interface - no need to install additional software.
  • Front-facing connectors make it easy to connect cables, and the slim form factor saves space on the DIN rail.
  • Troubleshoot with powerful diagnostics, including live data monitor, status screen, and support package.


Latest security features

  • Secure boot functionality to detect firmware tampering and protect against malware attacks and infections.
  • Security switch that locks your configuration and prevents any unauthorized access.
  • The ports used in production have been disabled to prevent malware from being loaded via the ports.


For industrial environments

  • Robust, compact housing.
  • Industrial components are CE and UL tested and certified.
  • Wide temperature range, -25°C to 70°C.
  • Top-hat rail mounting for installation close to the connected devices, reducing wiring effort.


Common Ethernet Features

  • Common Ethernet
  • Cover multiple protocols with a single gateway and reduce storage costs
  • Supports EtherNet/IP adapter, EtherCAT slave, Modbus TCP server or PROFIENT IO device (PROFINET IO device – EtherNet/IP adapter pre-loaded)
  • Transfer 1 448 bytes with EtherNet/IP, 1486 bytes with EtherCAT, 1 500 bytes with Modbus TCP and 1 024 bytes with PROFINET to and from the gateway
  • Download your protocol firmware from the product support page (free)
  • Load your protocol firmware via the gateway web-configuration interface
  • Dual RJ45 Ethernet ports with 10/100 Mbit full duplex
  • Daisy chaining with integrated switch


Dimensions (L x W x H) with serial and power connector 98 x 27 x 144 mm
3.85 x 1.06 x 5,67 in
Weight 150 grams, 0.33 lb
Buttons and switches Reset button and security switch
LEDs Gateway, Network 1 & Network 2
IP rating IP20
Housing material PC ABS, UL 94 VO
Mounting DIN rail (35 * 7,5/15)




Operating temperature -25 to 70° C, -13 to 158° F
Storage temperature -40 to 85° C, -40 to 185° F
Relative humidity 0-95% non condensing
Installation altitude Up to 2 000 m




Input voltage 12 - 30 VDC
Current consumption Typical: 160 mA @ 24V Max: 400 mA @ 12V
Power connector 3-pin plug with screw terminal
Protection Reverse voltage protection and short circuit protection




Ports 2 x Ethernet ports per Ethernet protocol
Isolation Galvanic isolation
Bitrate 10/100 Mbit full duplex
Connector RJ45
Switch. Dual port cut-through switch




Mode PROFINET IO-Device (slave)            
Class  A, B
Communication channels  Real Time Channel (RT)
Input data size 1 024 bytes             
Output data size 1 024 bytes            
Minimum cycle time 1 ms
Max number of connections 1 IO Controller Application Relationship + 2 Device Access Application Relationships
Netload class Class III
I&M records Manufacturer data (I&M0), Tag information (I&M1), Date/Time (I&M2), Description (I&M3)
SNMP Available
GSDML File Available
Certification PI Certified


Mode Adapter (slave)          
Messages Implicit and explicit
Max no of scanner connections 1 input/output (exclusive owner)
3 listen only or input only
Input data size 1 448 bytes (with large forward open) 
Output data size 1 448 bytes (with large forward open) 
Network redundancy  Device Level Ring (DLR), beacon-based       
Quick connect Class B 
Certification ODVA Certified
Minimum cycle time 1 ms for class 1 connections, 100 ms for class 3 connections
EDS File Available


Mode EtherCAT slave according to IEC 61158 Type 12 (ETG.1000)       
Addressing modes Logical, node, and position
Synchronization modes Free run
Input data size 1 486 bytes
Output data size 1 486 bytes 
Network redundancy  Device Level Ring (DLR), beacon-based       
Minimum cycle time 100  μs
Features Supports CANopen over EtherCAT (CoE)
ESI File Available


Mode Server      
Max number of connections  4
Input data size 1 500 bytes             
Output data size 1 500 bytes            


UL CULUSfile number E214107
CE 2014/30/EU
KC R-R-ABJ-Communicator (Pending for EtherCAT MainDevice)

EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
EN 55032


IEC 60068-2-1 Ab
IEC 60068-2-2 Bb
IEC 60068-2-1 Ab
IEC 60068-2-2 Bb
IEC 60068-2-14 Nb
IEC 60068-2-30 Db
IEC 60068-2-78 Cab
IEC 60068-2-78 Cab

Vibration and shock

IEC 60068-2-27
IEC 60068-2-6

Waste certification WEE




Configuration software Web based configuration
Configuration ports Dedicated 10/100 Mbit RJ45 Ethernet configuration port and Ethernet ports




Secure boot Ensures software authenticity
Security switch Physical switch that enable/disable access to the web based configuration interface




Content Gateway, power connector, start-up guide, compliance information sheet
Box material Cardboard



MTBF > 1 500 000 h, Telcordia Method I Case 3 at 30° C



The User Interface enables you to:

  • Change the configurations without installing additional software
  • Use drag and drop functionality to configure the gateway
  • Import or export files or firmware
  • Analyze live data or export a log file for deeper analysis
  • Use the support tab to open the relevant user guide or generate a customized support package
  • Want to brand your interface? No problem! Customize the interface to meet your look 

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới