Stackable converter from
ISO 11898-2 to fiber optic cable
Display | Transmit and defective segment (three duo LEDs), Power (one LED) |
CAN bus interface | ISO 11898-2, Sub-D9 connector. CAN termination resistors are integrated (switchable). Integrated backbone bus. |
FOC connection | 2 x F-SMA or ST terminal for duplex line (multi-mode glass 50/125 µm, 62.5/125 µm duplex) |
Baudrate | Up to 1 Mbit/s |
Delay | ~300 ns (translates into ~60 m (~90ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m) |
Power supply | 9-35 V DC, 1.5 W typ., through terminals |
Galvanic isolation | 1 kV, 1 sec.; CAN 1 |
Certification | CE, FCC |
Temperature range | -20 ºC ... +70 ºC |
Housing, size | Plastic enclosure, 22.5 x 100 x 115 mm (without FO connector) |
1.01.0068.45010 | CAN-CR210/FO - Glass fiber version with F-SMA connector |
1.01.0068.46010 | CAN-CR210/FO - Glass fiber version with ST connector |
1.04.0073.00000 | T bus connector |