Anybus Wireless Bolt IoT - AWB1000-B

Giá bán: Liên hệ

Mã sản phẩm: AWB1000

Thương hiệu: HMS

Tình trạng: Còn hàng

Ordering Information 

ORDER CODE(S): AWB1000 (Black top), AWB1001 (White top)
INCLUDED COMPONENTS:

  • 3-pin power screw connector.
  • Quickstart Guide.
  • Safety & Compliance sheet.
  • Global roaming SIM-card (optional activation with separate charge)
Tư vấnhotline0965746247

Anybus Wireless Bolt IoT

The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost. 

The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.

Features & Benefits

  • Intuitive and interesting form-factor; M50 through-hole mount on any flat surface
  • World-wide coverage on a single module with industry and mobile network certifications
  • LPWA Global 13 band LTE NB-IoT, LTE CAT-M1 and GPRS/EDGE failback
  • Ultra-Low Power Mode; Reduce power consumption for battery or solar/wind powered applications
  • Host interface RJ45 with 10/100 Mbit/s Ethernet
  • PoE (Power over Ethernet) option, single cable with both power and communication
  • Transparent transfer of any TCP/UDP based protocol
  • Built-in firewall, NAT and DHCP server
  • Nano SIM-card slot.

Key use cases

 

  • Internet access for any machine or device with an Ethernet
    port
  • Low Power/Sleep mode for connecting battery/wind/solar
    powered equipment

 

Usecase

Technical Specifications

Cellular standards

4G LTE: Category Cat-M1 and NB-IoT. Frequency Bands B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B26, B28
2G: EDGE, GPRS bands 850, 900, 1800, 1900

Host interface RJ45 Ethernet 10/100 Mbit/s
Operating temperature. Shadow black and white: -40 to +65 °C, Direct sunlight: Black -40 to +45 °C, White -40 to +65 °C (Storage temperature: -40 to +85 °C)
Data speeds

Peak Download Rate Cat-M1: 300kbps, NB-IoT: 27kbps, 2G/EDGE: 200kbps
Peak Upload Rate Cat-M1: 375kbps, NB-IoT: 65kbps, 2G/EDGE: 200kbps

Latency

CAT-M1: 10ms–15ms
NB-IoT: 1.6s–10s
2G/GPRS/EDGE: 700ms–2s

Power

11-33 VDC, PoE (Power over Ethernet) PD according to IEEE 802.3af. Redundant or separate operation of PoE and screw terminals for increased robustness.
Power Consumption: Sleep Mode: DC terminal 0,1W. PoE 0,3W
Idle Mode: DC terminal 0,6W. PoE 0,8W
Worst Case (GPRS/2G): DC terminal 3,2W. PoE 3,6W. Peak current: 1.2A@11VDC

Weight

95g

Connectors RJ45 Ethernet/PoE, 3-pin screw connector for power
Housing material Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C. Base: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.
IP protection class IP66, IP67 and UL NEMA 4X for top (outside the host), IP21 for base (inside the host)
Dimensions Diameter: 68 mm. Overall height: 75 mm without DC-connector, 84 mm incl. PS-connector. Height aove mounting surface: 41 mm.
Mounting M50 screw and nut (50.5 mm hole needed)
Configuration Two different methods: 1. Accessing the built-in web pages via Ethernet. 2. Sending REST-commands via Ethernet.
Vibration compatibility Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g. Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms.
Humidity compatibility EN 600068-2-78: Damp heat, +40°C, 90% (non condensing).
Certifications CE/RED, FCC/IC, GCF and PTCRB, UL 62368/UL 60950
UL file E214107
Order Codes AWB1000 (Anybus Wireless Bolt IoT black)
AWB1001 (Anybus Wireless Sunbolt IoT white top and black base)

Ordering Information 

ORDER CODE(S): AWB1000 (Black top), AWB1001 (White top)

INCLUDED COMPONENTS:

  • 3-pin power screw connector.
  • Quickstart Guide.
  • Safety & Compliance sheet.
  • Global roaming SIM-card (optional activation with separate charge)

ACCESSORIES:
024707 - Power Supply 90-264 VAC to 24VDC 19W world socket kit,
1,4 meter cable and 3-pole Bolt power connector. 
AWB4005 - Anybus PoE injector 100-240VAC. 35W incl. world power cable
AWB4006 - Anybus PoE injector 12-57VDC. 30W, dual PoE ports

WARRANTY:  3 years  

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

Được mua nhiều

zalo