Anybus® Wireless Bridge enables you create an industrial wireless connection in an industrial Ethernet network. This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and Wireless LAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable. It provides an effective wireless range of up to 400 meters.
BRIDGING TCP/IP ETHERNET
The Wireless Bridge makes it possible to operate leading TCP/IP based industrial Ethernet networks, such as BACnet/IP, PROFINET, EtherNet/IP and Modbus TCP, over Bluetooth and Wireless LAN 2.4 / 5 GHz.
Point-to-point or multipoint Anybus Wireless Bridge is often used as an Ethernet cable replacement (point-to-point communication). But it can also be used as an access point for up to seven Wireless LAN/Bluetooth clients.
|Wired interface||Ethernet 10/100 Mbit/s|
|Dimensions (H•W•D)||93 x 68 x 33mm|
|Weight||120g or 0,26 lbs|
|Operating temperature||-30 to +65 °C or -22 to +149 °F (Storage temp: -40 to +85 °C )|
|Power supply||9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.|
|Power consumption||0.7W idle, 1.7W max|
|Enclosure material||Plastic PC/ABS (Bayblend FR3010)|
|Mounting||Two screws (Ø 4 mm) on flat surface. DIN rail mount option available (optional accessory).|
|Max range||400 meters|
|Configuration||Three different methods:
• Accessing the built-in web pages in the product
• Using Easy Config modes (via push button or inside web interface)
• Sending AT commands
1x M12 for Ethernet (4-pin, D-coded)
Three internal antennas:
1. 2.4 GHz
2. 2,4GHz MIMO
One external antenna:
1. 2,4/5GHz dual band
|The external antenna does not provide better range, but allows connectivity if the Wireless Bridge
needs to be placed inside a radio-secure environment such as a steel cabinet. When mounting inside a steel cabinet antenna cables with magnetic foot or screw mount should also be considered.
|Europe||ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. 2014/53/EU
Radio Equipment Directive (RED)
|USA||FCC 47 CFR part 15, subpart B.
UL: Ind. Cont. Eq. also Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D,T4. UL file: E203225
|Other countries||Australia, Colombia, Turkey, Malaysia, Peru, Mexico, Argentina.
Pending: Brazil, India, Philippines, South Africa, Korea.
|WLAN Security||WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.|
Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved
Purchasing instructions and terms and conditions: How to buy
AWB3000 (WITH INTERNAL ANTENNAS)
AWB3010 (WITH EXTERNAL ANTENNA)
Quick start guide, manuals. (Power supply not included)
Order Code: 023040
|Order Code: 024700
IP67 M12 connector kit for power and Ethernet,
with screw terminals
|Order Code: 024701
DIN clip with screws
|Order Code: 024702
Replacement external antenna. Foldable, dual band.
Magnetic antenna foot with 1,5 m cable and
RPSMA connector, excl. antenna.