CL1000: CAN Bus Logger
Aucontech Co Ltd
10 out of
10
CL1000: CAN Bus Logger
The plug & play CL1000 CAN logger records CAN bus data to an 8 GB SD card. The logger is 100% standalone (no PC required) and data is easily extracted via USB.
The CL1000 is ideal for vehicle development and field testing (cars, heavy duty & more).
Further, the CL1000 doubles as a powerful reverse engineering tool with live-streaming via Wireshark.
TECHNICAL SPECIFICATION
The value/cost of the CL1000 is unbeatable
See the docs section for the CLX000 intro, manual, firmware & software downloads.
| GENERAL | |
|---|---|
| Functionality | Data logger and real-time CAN interface |
| LEDs | Logger status via three externally visible LEDs |
| Firmware | Supports free firmware updates for adding features |
| Software | Free CANvas software for configuration, streaming & conversion |
| Safety | CE, FCC, IC, RoHS certified |
| CAN BUS | |
| Standard | Compliant with physical layer standard ISO 11898-2 |
| Identifiers | Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID) |
| Bit Rate | Bit rates up to 1 Mbps (manually configured or automatically detected) |
| Bit-rate auto-detection | Yes |
| Protocol Support | Protocol independent (i.e. able to log J1939, CANopen, OBD2, ...) |
| Filters | Advanced message filtering on four configurable channels |
| Silent Mode | Yes (does not affect CAN-bus transmission) |
| Fail-Safes | The device does not terminate the CAN-bus internally |
| DATA LOGGING | |
| SD Card | Replaceable 8 GB SD card (optional 32 GB) |
| Real-Time Clock | No (see instead the CL2000 or CL3000) |
| Control Signal | Logging state (enabled/disabled) can be changed run-time using a CAN-bus control message |
| Heartbeat Signal | Supports heartbeat signal to periodically indicate logger status |
| Cyclic Logging | Supports cyclic logging mode (oldest log file is deleted when file system is full) |
| Down Sampling | CAN ID specific message down-sampling to reduce frequency of logged messages |
| Transmit | Transmit up to 20 customized CAN bus messages (e.g. for OBD2 queries) |
| File System | Standard FAT file system |
| SUPPLY | |
| Power via CAN-bus | Power can be supplied from the CAN connector (log/stream) or via USB (data extraction) |
| Via CAN bus | Power supplied by the CAN bus (+7.0V to +36V DC) |
| Protection | Reverse voltage protection on CAN-bus supply |
| Transient voltage pulse protection on CAN-bus supply | |
| Power via USB | Power supplied by USB (+5.0V DC) |
| Consumption | The logger's power consumption is approximately 1 W |
| MECHANICAL | |
| Enclosure | Robust, small enclosure |
| Dimensions | 66.7 x 42.7 x 23.5 mm (L x W x H) |
| Weight | 45 grams |
| Connector | Standard D-sub 9 (DB9) connector (OBD2, J1939, "generic" adaptor optional) |
| USB | Standard mini USB connector for extracting data & streaming (cable not included) |
| Temperature | Operating temperature: -20degC to +65degC |
| IP Rating | IP Rating 40 |
Được mua gần đây
Anybus X-gateway – CANopen Master – PROFINET-IO Device AB7307-B
Giá bán: Liên hệ
Sản phẩm cùng loại
CANmod.input: 8 x Analog/Digital/Pulse to CAN Bus Converter
Giá bán: Liên hệ
![CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]](http://bizweb.dktcdn.net/thumb/grande/100/477/455/products/thermocoupletocanbuscanmodtemp.jpg?v=1696601134423)
CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]
Giá bán: Liên hệ
CANedge1: 2x CAN Bus Data Logger (SD + RTC)
Giá bán: Liên hệ
CL2000: CAN Bus Logger (+RTC)
Giá bán: Liên hệ
