Modbus TCP Client - CC-LinkSlave - AB9009-B

Giá bán: Liên hệ

Mã sản phẩm: AB9009-B

Thương hiệu: HMS

Tình trạng: Còn hàng

Ordering Information


- Quick start documentation
- Configuration software available for download
- (Power supply not included)

    Tư vấnhotline0965746247

    Anybus X-gateway - Modbus TCP Client - CC-LinkSlave

    The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus TCP and CC-Link networks.


    The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks.This offloads your PLC from working with additional calculations. The gateway acts as a Slave on the CC-Link network and as a full Master/Client on the Modbus TCP network. The data transmission between the two networks is completely transparent with a maximum I/O data capacity of 256 bytes in each direction.


    Configuration is made via Ethernet and a built-in web page. The configuration page is used to configure Ethernet TCP/IP settings, Modbus-TCP client/server configuration and I/O data size transfer between Modbus TCP and the chosen network.


    Features and benefits

    • Fast copying of cyclic I/O data between a Modbus TCP and a CC-Link network (5 ms)
    • Allows for the integration of Modbus TCP based server/slave devices into other PLC control systems
    • Fulll Modbus TCP Client/Master functionality, eliminates the need for an PLC controller on the Modbus TCP network
    • Connects up to 64 Modbus Servers/Slave devices
    • Max I/O data capacity of 256 bytes in each direction
    • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
    • SD memory card slot allows for backup, configuration and easy module replacement
    • Robust stand-alone housing for use in harsh industrial environments
    • Global free technical support and consultancy

    Modbus TCP Client/Master interface

    Modbus TCP Client and Server setup is made via an included visual web configuration interface without the need for any programming.

    • Modbus TCP Client functionality according to Modbus specification V1.1B 
    • Support for Modbus TCP functions 1, 2, 3, 4, 5, 6, 15, 16, 23
    • Connects up to 64 Modbus TCP servers/slaves
    • Supports up to max 256 bytes of Input and 256 bytes of Output data
    • 10/100Mbit operation in full or half-duplex
    • Integrated FTP server provides easy file management using standard FTP clients
    • Web server with dynamic data capability and Server Side Include (SSI) capability
    • Email client with dynamic data capability and Event-triggered email handling
    • Downlink Live List providing Modbus-TCP transaction status to uplink PLC
    • Control and Status words for downlink network control/status
    • Individual Modbus TCP server port number setting
    • Byte Swap feature
    • Full Modbus address range (1-65536)
    • Dual Modbus TCP RJ-45 ports available simultaneously


    CC-Link Slave interface

    CC-Link Slave settings can be made either via on-board switches, or by importing the provided .CSP file into engineering tool of the controlling PLC.

    • Complete CC-Link slave Version 1 and 2 functionality
    • CC-Link Conformance BAP-05027-B specification
    • Transparent CC-Link communication (Standard Mode)
    • PLC Profile compliant communication (PLC profile mode)
    • Max. 896 bits/128 words (368 bytes) of I/O data in each direction
    • Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
    • Up to 4 occupied stations
    • Up to 8 extension cycles (version 2 only)
    • CC-Link configuration via on-board switches or via .CSP file
    • 1x 5-pin, 5.08 Phoenix plug network connector

    Technical specifications

    Dimensions  (L•W•H) 110 x 35 x 101 mm or 4,33 x 1,38 x 3,98"                                                      
    Weight 160g or 0,35 lbs  
    Operating temperature -25 to +70 °C  or  -13 to +158 °F  
    Storage temperature -40 to +85 °C  or  -40 to +185 °F  
    Power supply 24 VDC  
    Current consumption Typical 150mA  
    USB port For firmware upgrades  
    SD memory card slot  For backup, configuration and easy replacement  
    Modbus TCP connector 2x RJ45  
    Fieldbus/Ethernet connector (See the secondary network interface details above)  
    Galvanic isolation On both BUS/Ethernet side  
    Mechanical rating IP20, NEMA rating 1  
    Mounting DIN-rail (EN 50022 standard) or Wall Mount (optional)  
    Certifications CE, CULUSRoHS

    Để được tư vấn miễn phí

    Quý khách hàng vui lòng để lại thông tin bên dưới