Anybus X-gateway - CC-Link IE Field Slave - PROFINET-IRT Device

The Anybus X-gateway allows you to seamlessly inter-connect/extend PLC control systems and their connected devices between a CC-Link IE Field and a PROFINET-IRT network.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave/Device on both networks, providing a simple network extension. The data transmission between the two networks is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Features and benefits

• Fast copying of cyclic I/O data between the two networks (10-15 ms)
• Proven and tested with all PLC manufacturers
• Supports up to a maximum of 512 bytes of Input and Output data in each direction
• Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
• Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
• Optional control status information added to I/O data for diagnostic purposes
• Robust stand-alone housing for use in harsh industrial environments
• Global free technical support and consultancy

CC-Link IE Field interface

CC-Link IE Field Slave settings can be made either via on-board switches, or by importing the provided .CSP file into engineering tool of the controlling PLC.

• CC-Link IE Field interface of the X-gateway is conformance tested and approved by CLPA
• CC-Link Specification (Profile), publication BAP-05028-B
• Acts as a CC-Link IE Field Network Intelligent Device Station
• Max 512 bytes Input and 512 bytes I/O data
• On CC-Link IE Field: Max of 832 I/O points and 204 words Input and 832 I/O points and 204 words Output
• Baudrate 1 Gbit/s fixed operation
• TCP/IP settings configurable with web-page, Configuration Tool, DHCP or ARP
• CC-Link IE Field station setting via on-board switches
• 2x RJ-45 ports available simultaneously

PROFINET IRT Device/Slave interface 

PROFINET IRT Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC. 

• Complete PROFINET RT and IRT functionality specification 2.3
• Conformance tested supporting Class A, B and C
• Max 512 bytes of Input and 512 bytes of Output data
• Baud rate 10/100 Mbit/s Isochronous cycle times 0.25 to 4 ms (25 Us increments)
• SNMP-MIBII support
• TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
• LLDP (Linked Layer Discovery Protocol)
• Support for I&M (Identification & Maintenance)
• PROFINET uplink configuration via .GSDML file
• Dual port cut-through switch
• Dual RJ-45 ports available simultaneously

• PROFINET Asset Management

   

Technical specifications